Journal

Designing a West Palm Beach High-Rise Condo: The View and the Building's Rules

A house in Palm Beach County and a high-rise condo in West Palm Beach can ask for the same level of care. They do not ask for the same plan.

In a waterfront or downtown tower, the view is usually the reason you bought the home. The light is stronger, the floor plate is tighter, and unlike a freestanding house, you are designing inside a building that already has rules: what the association will approve, which hours and days work can happen, and how a sofa or a slab is going to reach your door.

I start with the view and the light, then work backward through those constraints. We work directly with the building from the beginning so our ideas are realistic. The goal is a home that feels like yours, and a set of drawings that can be installed in that building.

Start with the view and the light

The first question I ask is what you see when you walk in, and what the sun does to that room at four in the afternoon.

In many West Palm Beach towers, the main rooms face the water, the Intracoastal, or the city, with floor-to-ceiling glass. Furniture has to sit low enough, and far enough from the glass, that it does not cut the horizon in half. A curved sofa, a pair of lounge chairs, and a simple table can be enough if the circulation around them stays clear. Built-ins belong on the walls that are not the view.

West- and south-facing glass gets strong afternoon sun, and water and pale terraces bounce it back into the room. That is beautiful, and it is hard on fabrics, artwork, and wood. I plan window treatments as part of the architecture, not as an afterthought: woven-wood or grassweave shades for daytime glare, custom drapery that can stack clear of the glass, and, when it suits the client, an automated system. If the building has impact-rated glazing, I coordinate treatments and any film with the architect or contractor. I do not specify the glass itself.

At night, a glass room can go from very bright to very flat. Layered lighting matters here more than a single row of recessed cans: soft brass or unlacquered brass wall sconces, a flush mount or pendant sized to the room, and task light where you actually sit and read. An alabaster sconce or seeded glass gives a warmer glow against the dark glass.

Materials that belong in a glass room

A tower living room is often brighter and harder than a comparable room in a house. I start with what will sit in the sun, where storage can go, and how the space should feel once the glass goes dark at night.

I am careful with anything that will sit in the sun. Solution-dyed acrylic and indoor-outdoor performance fabrics belong on the most exposed seating. Linen and other natural fibers can still be used, just not in the chair that takes the western sun all year. A bouclé or a performance velvet can work in a more protected position.

Storage is not optional in a condo; it is how the rooms stay calm. Custom millwork, such as stained white oak cabinetry, a built-in for the television, and a window bench, keeps the floor clear. I also like a coffee table with built-in storage, because it does useful work in the middle of the room without asking for another cabinet.

Flooring depends on when you are buying. If you are purchasing pre-construction and you get to make pre-selections for your unit, I would rather see oak tones for the flooring than white porcelain tile. Engineered oak with a stable core, in a vanilla or white oak tone, keeps a glass room feeling warm and light. Not every buyer gets that choice. Many units arrive with the flooring already done, and most people do not change the flooring in their units. If the floor is already in place, rugs are one of the simplest ways to soften the space. I have written more about oak, stone, porcelain, and LVP in Flooring for South Florida Homes and Condos.

You can see how I have handled light, millwork, and living spaces in the portfolio.

Condo board approvals

Most condo associations require written approval before you renovate, and many require a package even for work that feels small: moving a vanity, changing the entry door hardware, or adding millwork that is attached to the walls.

I cannot quote a single set of rules, because they belong to the building. The association typically wants a clear description of the work, drawings or a finish schedule, contractor information, and insurance certificates. Boards also set which hours and days you can do construction. In a new building, everyone tends to move in at the same time, so the building sometimes needs to stagger the work. That schedule is part of how we plan the job.

A complete, legible submission saves you from redesigning a bathroom or a lighting plan after the board has already said no. If you are still in contract on a unit, ask for the alteration guidelines early.

Drop ceilings, lighting, and shade pockets

In a high-rise, the ceiling of your unit is the underside of the concrete slab, and that slab is also the floor of the unit above. If we need to adjust the lighting plan, we build a drop ceiling.

This comes up often when we re-lay out the furniture plan. The existing lighting no longer lines up: there is no chandelier over the new dining table, or no fixture centered in the living room. A drop ceiling lets us rewire and add electrical so the light sits where the room now needs it. It also allows for different window treatments, including recessed shade pockets or shade housing, so the shades can tuck into the ceiling instead of sitting on the glass as an afterthought.

Existing and proposed furniture plan for a high-rise residence, drawn by Emily Krug.

A drop ceiling can be one of the most decorative upgrades in the home, not only a utility. Stretch ceilings are another way to finish this kind of work. Velum Design is a stretch ceiling company, with a base in Miami, that does them.

The service elevator, the loading dock, and the day of install

A beautiful drawing that cannot get off the elevator is not a finished design.

We select the furniture to make sure it fits in the elevator, and we do the same with slab materials and everything else that has to come into the unit. A full-slab island, a long sofa, or a dining table is measured not only for the room but for the elevator cab, the turns in the corridor, and the unit's door. If a piece will not fit, we need to know that while we can still change the design: a seamed counter, a sofa in two sections, or a table that ships in a base and a top.

There are times we use a crane for the must-have items that will not fit, a decision we make early with the building. We also plan around loading-dock reservations, padded service elevators, and limited hours, so the plan we draw can actually be installed.

A note on working together

Condo design is full-home work, even when the square footage is modest, because the decisions are connected: the lighting, the millwork, the board package, the elevator, and the install. You can read more about how I approach full-home design, renovations, and new builds, and about working directly with me.

If you are considering a West Palm Beach high-rise or waterfront condo, I would be glad to look at it with you. Book a free 30-minute discovery call, and send photos, a floor plan, or the listing beforehand if you have them.

Frequently asked questions

Can you renovate a condo in West Palm Beach?

Yes, in most buildings you can renovate, but you usually need the association's approval first. What is allowed depends on that building's guidelines. Boards also set which hours and days construction can happen, and in a new building they sometimes stagger the work because so many owners are moving in at once.

Do I need a designer if I am buying a pre-construction unit?

Not always, but it is often the moment when small changes are still possible, including lighting, built-ins, and, if you get to make pre-selections, flooring. When a buyer does get to choose a floor, I would rather see oak tones than white porcelain tile.

Why do you use a drop ceiling in a high-rise?

The ceiling is the concrete slab, which is also the floor of the unit above, so we cannot freely move electrical in that slab. When we re-lay out the furniture plan, the existing lighting often no longer lines up with the dining table or the living room. A drop ceiling lets us rewire, add electrical, and build recessed shade pockets, and it can be one of the most decorative upgrades in the home.

What if a sofa or a slab will not fit in the elevator?

We select furniture, slab materials, and the rest of what comes into the unit with the elevator in mind, so most pieces are chosen to fit. For a must-have item that will not fit, there are times we use a crane. We work that out with the building from the beginning.

What should I send before a discovery call?

Photos of the rooms, the view, and any existing finishes, plus a floor plan or listing if you have one. If the building has already given you alteration guidelines, those are useful too.

Discovery Call

Book a free 30-minute discovery call. Send photos or plans beforehand if you have them.

Book a Discovery Call
Book a Call